Stain: Natural / Clear Coat (no stain)
Wood: Alder

Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through.

Natural / Clear Coat (no stain)

Catalyzed Conversion Varnish is the base of our Natural (clear coat). Conversion varnishes produce high quality, abrasion resistant finishes. Conversion varnishes are also fast drying, they contain self sealers and they have excellent non-yellowing properties. WalzCraft Sealers and Topcoats are applied on a flat line finishing system which distributes a perfectly even amount of material throughout each product.

Although a Natural / Clear Coat (no stain) is technically not a stain color, the application of just this clear finish will change the color and appearance of most solid wood and veneer. On certain species the color change can be very noticeable. Because of this, WalzCraft strongly recommends that final decisions regarding the selection of a wood species should always be made with finished samples, even if the finish is only a Natural / Clear Coat (no stain).

Common Wood Species and Grade combinations when using a natural (no stain finish):

  • Alder – (Select/Premium Grade)
  • Alder – (Rustic Grade)

Approximate Matches for this Combination:

Alder – (Natural/Standard Grade) – Natural (Clear Coat)

  • Melamine:
  • Morning Dew – W166 – Panolam
  • Laminate:
  • 346 – Formica
  • PVC Edgebanding:
  • 4512c – Dolken

The above approximate matches allow you to order cabinet doors, moldings, and other wood components prefinished from WalzCraft to approximately match cabinet boxes and interiors built using these products (not supplied by WalzCraft).

VIEW APPROXIMATE MATCH PDF

View more Melamine and Laminate Matches

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Stain: Natural / Clear Coat (no stain)
Wood: Ash

Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through.

Natural / Clear Coat (no stain)

Catalyzed Conversion Varnish is the base of our Natural (clear coat). Conversion varnishes produce high quality, abrasion resistant finishes. Conversion varnishes are also fast drying, they contain self sealers and they have excellent non-yellowing properties. WalzCraft Sealers and Topcoats are applied on a flat line finishing system which distributes a perfectly even amount of material throughout each product.

Although a Natural / Clear Coat (no stain) is technically not a stain color, the application of just this clear finish will change the color and appearance of most solid wood and veneer. On certain species the color change can be very noticeable. Because of this, WalzCraft strongly recommends that final decisions regarding the selection of a wood species should always be made with finished samples, even if the finish is only a Natural / Clear Coat (no stain).

Common Wood Species and Grade combinations when using a natural (no stain finish):

  • Ash – Brown (Select/Premium Grade)
  • Ash – White (Select/Premium Grade)

Color Samples

WalzCraft does not stock color block samples in this particular wood species and stain combination. However, you may order an individual Wood Species Sample / Non-Inventory Color Block.


Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Stain: Natural / Clear Coat (no stain)
Wood: Beech

Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through.

Natural / Clear Coat (no stain)

Catalyzed Conversion Varnish is the base of our Natural (clear coat). Conversion varnishes produce high quality, abrasion resistant finishes. Conversion varnishes are also fast drying, they contain self sealers and they have excellent non-yellowing properties. WalzCraft Sealers and Topcoats are applied on a flat line finishing system which distributes a perfectly even amount of material throughout each product.

Although a Natural / Clear Coat (no stain) is technically not a stain color, the application of just this clear finish will change the color and appearance of most solid wood and veneer. On certain species the color change can be very noticeable. Because of this, WalzCraft strongly recommends that final decisions regarding the selection of a wood species should always be made with finished samples, even if the finish is only a Natural / Clear Coat (no stain).

Common Wood Species and Grade combinations when using a natural (no stain finish):

  • Beech – European Steamed (Select/Premium Grade)

Color Samples

WalzCraft does not stock color block samples in this particular wood species and stain combination. However, you may order an individual Wood Species Sample / Non-Inventory Color Block.


Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Stain: Natural / Clear Coat (no stain)
Wood: Butternut

Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through.

Natural / Clear Coat (no stain)

Catalyzed Conversion Varnish is the base of our Natural (clear coat). Conversion varnishes produce high quality, abrasion resistant finishes. Conversion varnishes are also fast drying, they contain self sealers and they have excellent non-yellowing properties. WalzCraft Sealers and Topcoats are applied on a flat line finishing system which distributes a perfectly even amount of material throughout each product.

Although a Natural / Clear Coat (no stain) is technically not a stain color, the application of just this clear finish will change the color and appearance of most solid wood and veneer. On certain species the color change can be very noticeable. Because of this, WalzCraft strongly recommends that final decisions regarding the selection of a wood species should always be made with finished samples, even if the finish is only a Natural / Clear Coat (no stain).

Common Wood Species and Grade combinations when using a natural (no stain finish):

  • Butternut – (Natural/Standard Grade)

Color Samples

WalzCraft does not stock color block samples in this particular wood species and stain combination. However, you may order an individual Wood Species Sample / Non-Inventory Color Block.


Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Stain: Natural / Clear Coat (no stain)
Wood: Cherry

Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through.

Natural / Clear Coat (no stain)

Catalyzed Conversion Varnish is the base of our Natural (clear coat). Conversion varnishes produce high quality, abrasion resistant finishes. Conversion varnishes are also fast drying, they contain self sealers and they have excellent non-yellowing properties. WalzCraft Sealers and Topcoats are applied on a flat line finishing system which distributes a perfectly even amount of material throughout each product.

Although a Natural / Clear Coat (no stain) is technically not a stain color, the application of just this clear finish will change the color and appearance of most solid wood and veneer. On certain species the color change can be very noticeable. Because of this, WalzCraft strongly recommends that final decisions regarding the selection of a wood species should always be made with finished samples, even if the finish is only a Natural / Clear Coat (no stain).

Common Wood Species and Grade combinations when using a natural (no stain finish):

  • Cherry – (Select/Premium Grade)
  • Cherry – No Sap – (Natural/Standard Grade)
  • Cherry – (Rustic Grade)

Photosensitive Darkening Process

It is natural for Cherry, Eucalyptus & Mahogany wood to darken over time due to the natural photosensitive darkening process. For these wood species, we recommend ordering new samples if the current date exceeds the “Ship Date” by more than 1 year.


Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Stain: Natural / Clear Coat (no stain)
Wood: Cypress

Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through.

Natural / Clear Coat (no stain)

Catalyzed Conversion Varnish is the base of our Natural (clear coat). Conversion varnishes produce high quality, abrasion resistant finishes. Conversion varnishes are also fast drying, they contain self sealers and they have excellent non-yellowing properties. WalzCraft Sealers and Topcoats are applied on a flat line finishing system which distributes a perfectly even amount of material throughout each product.

Although a Natural / Clear Coat (no stain) is technically not a stain color, the application of just this clear finish will change the color and appearance of most solid wood and veneer. On certain species the color change can be very noticeable. Because of this, WalzCraft strongly recommends that final decisions regarding the selection of a wood species should always be made with finished samples, even if the finish is only a Natural / Clear Coat (no stain).

Common Wood Species and Grade combinations when using a natural (no stain finish):

  • Cypress – (Natural/Standard Grade)

Color Samples

WalzCraft does not stock color block samples in this particular wood species and stain combination. However, you may order an individual Wood Species Sample / Non-Inventory Color Block.


Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Stain: Natural / Clear Coat (no stain)
Wood: Douglas Fir

Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through.

Natural / Clear Coat (no stain)

Catalyzed Conversion Varnish is the base of our Natural (clear coat). Conversion varnishes produce high quality, abrasion resistant finishes. Conversion varnishes are also fast drying, they contain self sealers and they have excellent non-yellowing properties. WalzCraft Sealers and Topcoats are applied on a flat line finishing system which distributes a perfectly even amount of material throughout each product.

Although a Natural / Clear Coat (no stain) is technically not a stain color, the application of just this clear finish will change the color and appearance of most solid wood and veneer. On certain species the color change can be very noticeable. Because of this, WalzCraft strongly recommends that final decisions regarding the selection of a wood species should always be made with finished samples, even if the finish is only a Natural / Clear Coat (no stain).

Common Wood Species and Grade combinations when using a natural (no stain finish):

  • Fir – Douglas – Straight Grain

Color Samples

WalzCraft does not stock color block samples in this particular wood species and stain combination. However, you may order an individual Wood Species Sample / Non-Inventory Color Block.


Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Natural / Clear Coat (no stain) on Eucalyptus Red Grandis Wood
Stain: Natural / Clear Coat (no stain)
Wood: Eucalyptus - Red Grandis

Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through.

Natural / Clear Coat (no stain)

Catalyzed Conversion Varnish is the base of our Natural (clear coat). Conversion varnishes produce high quality, abrasion resistant finishes. Conversion varnishes are also fast drying, they contain self sealers and they have excellent non-yellowing properties. WalzCraft Sealers and Topcoats are applied on a flat line finishing system which distributes a perfectly even amount of material throughout each product.

Although a Natural / Clear Coat (no stain) is technically not a stain color, the application of just this clear finish will change the color and appearance of most solid wood and veneer. On certain species the color change can be very noticeable. Because of this, WalzCraft strongly recommends that final decisions regarding the selection of a wood species should always be made with finished samples, even if the finish is only a Natural / Clear Coat (no stain).

Common Wood Species and Grade combinations when using a natural (no stain finish):

  • Eucalyptus – Red Grandis (Natural/Standard Grade)

Color Samples

WalzCraft does not stock color block samples in this particular wood species and stain combination. However, you may order an individual Wood Species Sample / Non-Inventory Color Block.


Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Stain: Natural / Clear Coat (no stain)
Wood: Maple - Hard

Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through.

Natural / Clear Coat (no stain)

Catalyzed Conversion Varnish is the base of our Natural (clear coat). Conversion varnishes produce high quality, abrasion resistant finishes. Conversion varnishes are also fast drying, they contain self sealers and they have excellent non-yellowing properties. WalzCraft Sealers and Topcoats are applied on a flat line finishing system which distributes a perfectly even amount of material throughout each product.

Although a Natural / Clear Coat (no stain) is technically not a stain color, the application of just this clear finish will change the color and appearance of most solid wood and veneer. On certain species the color change can be very noticeable. Because of this, WalzCraft strongly recommends that final decisions regarding the selection of a wood species should always be made with finished samples, even if the finish is only a Natural / Clear Coat (no stain).

Common Wood Species and Grade combinations when using a natural (no stain finish):

    • Maple – Hard – (Select/Premium Grade)
    • Maple – Hard – Bird’s Eye (Select/Premium Grade)
    • Maple – Hard – Straight Grain (Select/Premium Grade)

Color Samples

This is an In-Stock Color Block and is available for purchase as an Individual Color Block or as part of a Color Block Set.

Approximate Matches for this Combination:

Hard Maple – (Select/Premium Grade) – Natural (Clear Coat)

Melamine:

  • – Country Maple – G478 – Duramine
  • – Fusion Maple – G477 – Duramine
  • – Hardrock Maple – G476 – Duramine
  • – Ruston Maple – WF200 – Flakeboard
  • – White Maple – 4368 – Funder/Dixie
  • – Hardrock Maple – 4610 – Funder/Dixie
  • – Northwood Maple – 4390 – Pluswood
  • – Norwegian Maple – S314 – Roseburg
  • – Hard Rock Maple – L303 – Tafisa

Laminate:

  • – 687 – Formica
  • – 992 – Formica
  • – W8340c – Nevamar
  • – WM791c – Pionite
  • – 7909 – Wilsonart
  • – 7911c – Wilsonart

PVC Edgebanding:

  • – 5191TL – Canplast
  • – 7500TL – Canplast
  • – 56524TL – Canplast
  • – 392 – Dolken
  • – 4274 – Dolken
  • – 4901 – Dolken
  • – 7042 – EdgeCo
  • – 7046 – EdgeCo
  • – 1195T – Olon
  • – 2410T – Olon
  • – 8435T – Olon

Wood Veneer Edgebanding:

The above approximate matches allow you to order cabinet doors, moldings, and other wood components prefinished from WalzCraft to approximately match cabinet boxes and interiors built using these products (not supplied by WalzCraft).

VIEW APPROXIMATE MATCH PDF

View more Melamine and Laminate Matches

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Stain: Natural / Clear Coat (no stain)
Wood: Hickory

Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through.

Natural / Clear Coat (no stain)

Catalyzed Conversion Varnish is the base of our Natural (clear coat). Conversion varnishes produce high quality, abrasion resistant finishes. Conversion varnishes are also fast drying, they contain self sealers and they have excellent non-yellowing properties. WalzCraft Sealers and Topcoats are applied on a flat line finishing system which distributes a perfectly even amount of material throughout each product.

Although a Natural / Clear Coat (no stain) is technically not a stain color, the application of just this clear finish will change the color and appearance of most solid wood and veneer. On certain species the color change can be very noticeable. Because of this, WalzCraft strongly recommends that final decisions regarding the selection of a wood species should always be made with finished samples, even if the finish is only a Natural / Clear Coat (no stain).

Common Wood Species and Grade combinations when using a natural (no stain finish):

  • Hickory – Brown (Select/Premium Grade)
  • Hickory – White (Select/Premium Grade)
  • Hickory – Calico/Mixed (Select/Premium Grade)
  • Hickory – (Rustic Grade)
  • Hickory – Brown (Rustic Grade)
  • Hickory – White (Rustic Grade)

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Natural / Clear Coat (no stain) on Mahogany - Gen. Plantation Wood
Stain: Natural / Clear Coat (no stain)
Wood: Mahogany - Gen. Plantation

Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through.

Natural / Clear Coat (no stain)

Catalyzed Conversion Varnish is the base of our Natural (clear coat). Conversion varnishes produce high quality, abrasion resistant finishes. Conversion varnishes are also fast drying, they contain self sealers and they have excellent non-yellowing properties. WalzCraft Sealers and Topcoats are applied on a flat line finishing system which distributes a perfectly even amount of material throughout each product.

Although a Natural / Clear Coat (no stain) is technically not a stain color, the application of just this clear finish will change the color and appearance of most solid wood and veneer. On certain species the color change can be very noticeable. Because of this, WalzCraft strongly recommends that final decisions regarding the selection of a wood species should always be made with finished samples, even if the finish is only a Natural / Clear Coat (no stain).

Common Wood Species and Grade combinations when using a natural (no stain finish):

  • Mahogany – Gen. Plantation (Natural/Standard Grade)

Color Samples

WalzCraft does not stock color block samples in this particular wood species and stain combination. However, you may order an individual Wood Species Sample / Non-Inventory Color Block.


Photosensitive Darkening Process

It is natural for Cherry, Eucalyptus & Mahogany wood to darken over time due to the natural photosensitive darkening process. For these wood species, we recommend ordering new samples if the current date exceeds the “Ship Date” by more than 1 year.


Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Natural / Clear Coat (no stain) on Mahogany - Sipo Wood
Stain: Natural / Clear Coat (no stain)
Wood: Mahogany - Sipo

Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through.

Natural / Clear Coat (no stain)

Catalyzed Conversion Varnish is the base of our Natural (clear coat). Conversion varnishes produce high quality, abrasion resistant finishes. Conversion varnishes are also fast drying, they contain self sealers and they have excellent non-yellowing properties. WalzCraft Sealers and Topcoats are applied on a flat line finishing system which distributes a perfectly even amount of material throughout each product.

Although a Natural / Clear Coat (no stain) is technically not a stain color, the application of just this clear finish will change the color and appearance of most solid wood and veneer. On certain species the color change can be very noticeable. Because of this, WalzCraft strongly recommends that final decisions regarding the selection of a wood species should always be made with finished samples, even if the finish is only a Natural / Clear Coat (no stain).

Common Wood Species and Grade combinations when using a natural (no stain finish):

  • Mahogany – Sipo (Natural/Standard Grade)
  • Mahogany – Sipo (Select/Premium Grade)
  • Mahogany – Sipo – Quarter Sawn (Natural/Standard Grade)
  • Mahogany – Sipo – Quarter Sawn (Select/Premium Grade)

Color Samples

WalzCraft does not stock color block samples in this particular wood species and stain combination. However, you may order an individual Wood Species Sample / Non-Inventory Color Block.


Photosensitive Darkening Process

It is natural for Cherry, Eucalyptus & Mahogany wood to darken over time due to the natural photosensitive darkening process. For these wood species, we recommend ordering new samples if the current date exceeds the “Ship Date” by more than 1 year.


Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Stain: Natural / Clear Coat (no stain)
Wood: Pine

Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through.

Natural / Clear Coat (no stain)

Catalyzed Conversion Varnish is the base of our Natural (clear coat). Conversion varnishes produce high quality, abrasion resistant finishes. Conversion varnishes are also fast drying, they contain self sealers and they have excellent non-yellowing properties. WalzCraft Sealers and Topcoats are applied on a flat line finishing system which distributes a perfectly even amount of material throughout each product.

Although a Natural / Clear Coat (no stain) is technically not a stain color, the application of just this clear finish will change the color and appearance of most solid wood and veneer. On certain species the color change can be very noticeable. Because of this, WalzCraft strongly recommends that final decisions regarding the selection of a wood species should always be made with finished samples, even if the finish is only a Natural / Clear Coat (no stain).

Common Wood Species and Grade combinations when using a natural (no stain finish):

  • Pine – White – Northern (Select/Premium Grade)
  • Pine – White – Northern (Knotty Grade)

Color Samples

WalzCraft does not stock color block samples in this particular wood species and stain combination. However, you may order an individual Wood Species Sample / Non-Inventory Color Block.


Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Stain: Natural / Clear Coat (no stain)
Wood: Poplar

Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through.

Natural / Clear Coat (no stain)

Catalyzed Conversion Varnish is the base of our Natural (clear coat). Conversion varnishes produce high quality, abrasion resistant finishes. Conversion varnishes are also fast drying, they contain self sealers and they have excellent non-yellowing properties. WalzCraft Sealers and Topcoats are applied on a flat line finishing system which distributes a perfectly even amount of material throughout each product.

Although a Natural / Clear Coat (no stain) is technically not a stain color, the application of just this clear finish will change the color and appearance of most solid wood and veneer. On certain species the color change can be very noticeable. Because of this, WalzCraft strongly recommends that final decisions regarding the selection of a wood species should always be made with finished samples, even if the finish is only a Natural / Clear Coat (no stain).

Common Wood Species and Grade combinations when using a natural (no stain finish):

  • Poplar – Green (Select/Premium Grade)
  • Poplar – White (Select/Premium Grade)

Color Samples

WalzCraft does not stock color block samples in this particular wood species and stain combination. However, you may order an individual Wood Species Sample / Non-Inventory Color Block.


Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Stain: Natural / Clear Coat (no stain)
Wood: Birch - Red

Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through.

Natural / Clear Coat (no stain)

Catalyzed Conversion Varnish is the base of our Natural (clear coat). Conversion varnishes produce high quality, abrasion resistant finishes. Conversion varnishes are also fast drying, they contain self sealers and they have excellent non-yellowing properties. WalzCraft Sealers and Topcoats are applied on a flat line finishing system which distributes a perfectly even amount of material throughout each product.

Although a Natural / Clear Coat (no stain) is technically not a stain color, the application of just this clear finish will change the color and appearance of most solid wood and veneer. On certain species the color change can be very noticeable. Because of this, WalzCraft strongly recommends that final decisions regarding the selection of a wood species should always be made with finished samples, even if the finish is only a Natural / Clear Coat (no stain).

Common Wood Species and Grade combinations when using a natural (no stain finish):

  • Birch – Red (Select/Premium Grade)

Color Samples

WalzCraft does not stock color block samples in this particular wood species and stain combination. However, you may order an individual Wood Species Sample / Non-Inventory Color Block.


Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Stain: Natural / Clear Coat (no stain)
Wood: Elm - Red

Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through.

Natural / Clear Coat (no stain)

Catalyzed Conversion Varnish is the base of our Natural (clear coat). Conversion varnishes produce high quality, abrasion resistant finishes. Conversion varnishes are also fast drying, they contain self sealers and they have excellent non-yellowing properties. WalzCraft Sealers and Topcoats are applied on a flat line finishing system which distributes a perfectly even amount of material throughout each product.

Although a Natural / Clear Coat (no stain) is technically not a stain color, the application of just this clear finish will change the color and appearance of most solid wood and veneer. On certain species the color change can be very noticeable. Because of this, WalzCraft strongly recommends that final decisions regarding the selection of a wood species should always be made with finished samples, even if the finish is only a Natural / Clear Coat (no stain).

Common Wood Species and Grade combinations when using a natural (no stain finish):

  • Elm – Red (Mill Grade)

Color Samples

WalzCraft does not stock color block samples in this particular wood species and stain combination. However, you may order an individual Wood Species Sample / Non-Inventory Color Block.


Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.