Beech - Rustic Grade
Wood: Beech
Grade: Rustic Grade

Weight: 3.006 Lb/Sq. Ft (Based on 3/4″ thickness)

This unique species will have many variations allowed. Mineral and knots are common. This product may include both heartwood and sapwood. Knot size and the percentage of mineral and knots are not allowed to be specified by the customer.

All materials will be structurally sound. In an effort to utilize as many natural characteristics as possible and to improve yield, some knots may have voids and some “Canyon Knots” may be partially filled, but no visible light will show through.

Knots are characteristic of Rustic Grade, however, they are difficult to include on moldings less than 1½” wide because they substantially weaken the molding. When molding is less than 1½” wide, WalzCraft will try to maintain a Rustic Grade look without the use of knots. Occasional worm holes are allowed.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Cherry - Calico Mix - Natural/Standard Grade Wood Species
Wood: Cherry - Calico / Mixed
Grade: Natural / Standard

Weight: 2.264 Lb/Sq. Ft (Based on 3/4″ thickness)

Natural characteristics common within this species are allowed. A small percentage of pin knots, mineral and gum pockets will be allowed on the face and in the profiled areas with voids allowed in gum pockets.

This grade will allow a mixture of sap and heartwood blended throughout, creating a calico look. When matching center panels for this species, WalzCraft pays particular attention to ensuring that Sapwood is mated/matched to Sapwood, and Heartwood is mated/matched to Heartwood to avoid Sapwood to Heartwood transitions at a glue line.

This grade is most desirable for medium to dark stain colors. To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Ash (Rustic Grade)
Wood: Ash
Grade: Rustic

Weight: 2.929 Lb/Sq. Ft. (Based on 3/4″ thickness)

This unique species will have many variations allowed. Mineral, sap, bird pecks, heartwood and knots are common.

Color may vary from a dark brown to white. Knot size and the percentage of mineral, sap, heartwood & knots are not allowed to be specified by the customer.

All materials will be structurally sound. In an effort to utilize as many natural characteristics as possible and to improve yield, some knots may have voids and some “Canyon Knots” may be partially filled, but no visible light will show through.

Knots are a characteristic of Rustic Grade, however, they are difficult to include on moldings less than 1 ½” wide because they substantially weaken the molding. When a molding is less than 1 ½” wide, WalzCraft will try to maintain a Rustic Grade look without the use of knots.

Occasional worm holes are allowed.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Walnut-No Sap (Rustic-Grade)
Wood: Walnut - No Sap
Grade: Rustic

Weight: 2.472 Lb/Sq. Ft (Based on 3/4″ thickness)

This unique species will have many variations allowed. Bark pockets, mineral, standard knots, pin knots, and partially filled “Canyon Knots” are common. Heartwood color variations are allowed, however, no sap is allowed on the face of the product. Sap which might appear in profiled areas is allowed in small amounts. Knot size and the percentage of bark pockets and rustic defects are not allowed to be specified by the customer. All material will be structurally sound.

In an effort to utilize as many natural characteristics as possible and to improve yield, some knots may have voids and some “Canyon Knots” may be partially filled, but no visible light will show through.

Knots are a characteristic of Rustic Grade, however, they are difficult to include on moldings less than 1 ½” wide because they substantially weaken the molding. When a molding is less than 1 ½” wide, WalzCraft will try to maintain a Rustic Grade look without the use of knots.

We feel this grade is acceptable for use with a Natural/Clear Coat (no stain) finish, but may be enhanced with a light walnut colored stain.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Butternut - No Sap - Rustic
Wood: Butternut - No Sap
Grade: Rustic

Weight: 1.786 Lb/Sq. Ft (Based on 3/4″ thickness)

This unique species will have many variations allowed. Due to the nature of Butternut, this grade often includes more worm holes than is generally found in WalzCraft’s other Rustic Grades. It may also include mineral, standard knots, pin knots, pith and partially filled “Canyon Knots”. Heartwood color variations are allowed, however, no sap is allowed on the face of the product. Sap which might appear in profiled areas is allowed in small amounts. Knot size and the percentage of rustic defects are not allowed to be specified by the customer. All material will be structurally sound.

In an effort to utilize as many natural characteristics as possible and to improve yield, some knots may have voids and some “Canyon Knots” may be partially filled, but no visible light will show through.

Knots are a characteristic of Rustic Grade, however, they are difficult to include on moldings less than 1 ½” wide because they substantially weaken the molding. When a molding is less than 1 ½” wide, WalzCraft will try to maintain a Rustic Grade look without the use of knots.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Butternut - Rustic Wood
Wood: Butternut
Grade: Rustic

Weight: 1.786 Lb/Sq. Ft (Based on 3/4″ thickness)

This unique species will have many variations allowed. Due to the nature of Butternut, this grade often includes more worm holes than is generally found in WalzCraft’s other Rustic Grades. It may also include mineral, Standard knots, pin knots, pith, and partially filled “Canyon Knots”. Knot size and the percentage of rustic defects are not allowed to be specified by the customer. All material will be structurally sound.

In an effort to utilize as many natural characteristics as possible and to improve yield, some knots may have voids and some “Canyon Knots” may be partially filled, but no visible light will show through.

Knots are a characteristic of Rustic Grade, however, they are difficult to include on moldings less than 1 ½” wide because they substantially weaken the molding. When a molding is less than 1 ½” wide, WalzCraft will try to maintain a Rustic Grade look without the use of knots.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Cherry - No Sap - Rustic
Wood: Cherry - No Sap
Grade: Rustic

Weight: 2.264 Lb/Sq. Ft (Based on 3/4″ thickness)

This unique species will have many variations allowed, including:

  • Gum pockets, mineral, standard knots, pin knots, and partially filled “Canyon Knots” are common.
  • Heartwood color variations are allowed, however, no sap is allowed on the face of the product.
  • Sap which might appear in profiled areas is allowed in small amounts.
  • Knot size and the percentage of gum pockets and rustic defects are not allowed to be specified by the customer.

All material will be structurally sound. In an effort to utilize as many natural characteristics as possible and to improve yield, some knots may have voids and some “Canyon Knots” may be partially filled, but no visible light will show through.

Knots are a characteristic of Rustic Grade, however, they are difficult to include on moldings less than 1 ½” wide because they substantially weaken the molding. When a molding is less than 1 ½” wide, WalzCraft will try to maintain a Rustic Grade look without the use of knots.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Cherry - No Sap - Ultra Rustic
Wood: Cherry - No Sap
Grade: Ultra Rustic

Weight: 2.264 Lb/Sq. Ft (Based on 3/4″ thickness)

This grade is everything that our rustic grade is and more. Heartwood color variations are allowed however, no sap is allowed on the face of the product. Sap which might appear in profiled areas is allowed in small amounts.

All material will be structurally sound. In an effort to utilize as many natural characteristics as possible and to improve yield, some knots may have voids and some “Canyon Knots” may be partially filled, but no visible light will show through.

Knots are a characteristic of Rustic Grade, however, they are difficult to include on moldings less than 1 ½” wide because they substantially weaken the molding. When a molding is less than 1 ½” wide, WalzCraft will try to maintain a Rustic Grade look without the use of knots.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Eucalyptus - Red Grandis - Value-Budget
Wood: Eucalyptus - Red Grandis
Grade: Value / Budget

This “Price Point Product” is similar to Lyptus and may contain: narrow staves, sapwood, heartwood, burls and all other natural characteristics commonly found within this species.

This grade will not be color and grain matched, but will be structurally sound and should prove to be a good value for your dollar.

Expect a large range of color throughout the entire order, but slightly less in range than Lyptus.

This grade is most desirable for medium to dark stain colors, but do expect some color variations from stave to stave due to the makeup of the raw material.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Eucalyptus - Red Grandis - (Natural / Standard Grade)
Wood: Eucalyptus - Red Grandis
Grade: Natural / Standard

This species is similar to Lyptus. Natural characteristics common within the species are allowed which will result in a mixture of light sap to dark heartwood blended throughout.

In lumber form, burls are abundant, so an occasional burl is not considered a defect.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Oak - Red - No Sap - Rustic
Wood: Oak - Red - No Sap
Grade: Rustic

Weight: 2.579 Lb/Sq. Ft (Based on 3/4″ thickness)

This unique species will have many variations allowed, including:

  • Bark pockets, worm holes, mineral, standard knots, and partial filled “Canyon Knots” are common.
  • Heartwood color variations are allowed, however, no sap is allowed on the face of the product.
  • Sap which might appear in profiled areas is allowed in small amounts.
  • Knot size and the percentage of bark pockets and rustic defects are not allowed to be specified by the customer.

All material will be structurally sound.

In an effort to utilize as many natural characteristics as possibly and to improve yield, some knots may have voids and some “Canyon Knots” may be partially filled, but no visible light will show through.

Knots are a characteristic of Rustic Grade, however, they are difficult to include on moldings less than 1 ½” wide because they substantially weaken the molding. When a molding is less than 1 ½” wide, WalzCraft will try to maintain a Rustic Grade look without the use of knots.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Oak - Red - No Sap - (Ultra Rustic Grade)
Wood: Oak - Red - No Sap
Grade: Ultra Rustic

Weight: 2.579 Lb/Sq. Ft (Based on 3/4″ thickness)

This grade is everything that our Rustic grade is and more. Heartwood color variations are allowed, however, no sap is allowed on the face of the product. Sap which might appear in profiled areas is allowed in small amounts. All material will be structurally sound.

In an effort to utilize as many natural characteristics as possible and to improve yield, some knots may have voids and some “Canyon Knots” may be partially filled, but no visible light will show through.

Knots are a characteristic of Rustic Grade, however, they are difficult to include on moldings less than 1 ½” wide because they substantially weaken the molding. When a molding is less than 1 ½” wide, WalzCraft will try to maintain a Rustic Grade look without the use of knots.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Oak- White - Rustic
Wood: Oak - White
Grade: Rustic

Weight: 2.906 Lb/Sq. Ft (Based on 3/4″ thickness)

This unique species will have many variations allowed. Mineral, sap and knots are common. Color variations from a whitish or grayish brown blend of sapwood and heartwood are allowed throughout. Knot size and the percentage of mineral, sap and knots are not allowed to be specified by the customer. Pin knots are allowed on the face and in profiled areas of the product. All materials will be structurally sound.

In an effort to utilize as many natural characteristics as possible and to improve yield, some knots may have voids and some “Canyon Knots” may be partially filled, but no visible light will show through.

Knots are a characteristic of Rustic Grade, however, they are difficult to include on moldings less than 1 ½” wide because they substantially weaken the molding. When a molding is less than 1 ½” wide, WalzCraft will try to maintain a Rustic Grade look without the use of knots.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Oak - White - Ultra Rustic
Wood: Oak - White
Grade: Ultra Rustic

Weight: 2.906 Lb/Sq. Ft (Based on 3/4″ thickness)

This grade is everything that our Rustic grade is and more.

All materials will be structurally sound.

In an effort to utilize as many natural characteristics as possible and to improve yield, some knots may have voids and some “Canyon Knots” may be partially filled, but no visible light will show through.

Knots are a characteristic of Rustic Grade, however, they are difficult to include on moldings less than 1 ½” wide because they substantially weaken the molding. When a molding is less than 1 ½” wide, WalzCraft will try to maintain a Rustic Grade look without the use of knots.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Ash - Calico-Mixed - Select Grade
Wood: Ash - Calico / Mixed
Grade: Select / Premium

Weight: 2.929 Lb/Sq. Ft. (Based on 3/4″ thickness)

Natural characteristics common within this species will be monitored under closer quality guidelines than our Natural/Standard grade.

This grade will allow a mixture of sap and heartwood blended throughout, creating a calico look.

This grade is most desirable for Natural/Clear Coat (no stain) or light stain color.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Alder - Value-Budget Grade
Wood: Alder
Grade: Value / Budget

Weight: 1.917 Lb/Sq. Ft. (Based on 3/4″ thickness)

This “Price Point Product” may contain: large quantities of narrow staves, sapwood, heartwood, pin knots, small knots that can be filled, grey stain, and all other natural characteristics commonly found within this species.

This grade will not be color and grain matched, but will be structurally sound and should prove to be a good value for your dollar. Expect a large range of colors throughout the entire order.

Due to the nature of the narrow stave width common within this grade, stile and rail components of the door are allowed to be edge glued.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Wood: Mahogany - Mixed Species
Grade: Value / Budget

Weight: 2.254 Lb/Sq. Ft (Based on 3/4″ thickness)

This “Price Point Product” may contain: narrow staves, sapwood, heartwood, pin knots and all other natural characteristics commonly found in the Mahogany family of tree. This grade will not be color and grain matched, but will be structurally sound and should prove to be a good value for your dollar. Expect a large range of color throughout the entire order as Sapele, Sipo, Plantation, and other species of Mahogany are all allowed.

This grade is most desirable for dark stain colors, but do expect some color variations from stave to stave due to the makeup of the raw material.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Mahogany Genuine Plantation - Natural Standard Grade
Wood: Mahogany - Genuine Plantation
Grade: Natural / Standard

Weight: 1.810 Lb/Sq. Ft (Based on 3/4″ thickness)

From plantation grown Mahogany grown on the island of Fiji. Natural characteristics common within this species are allowed which may result in a reddish brown blend of sapwood and heartwood throughout.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Mahogany - Sipo Quarter Sawn - Select Premium Grade
Wood: Mahogany - Sipo Quarter Sawn
Grade: Select / Premium

Weight: 2.254 Lb/Sq. Ft (Based on 3/4″ thickness)

This species can be compared to the Select grade Sipo with the only difference being the way it is cut at the sawmill. Quarter Sawn is achieved by cutting at a right angle to the circumference of the tree producing a flake-like look on the face of the lumber.

This grade is highly recommended when using a Natural/Clear Coat (no stain) to light stain color.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Mahogany - Quarter Sawn - Natural Standard Grade
Wood: Mahogany - Sipo Quarter Sawn
Grade: Natural / Standard

Weight: 2.254 Lb/Sq. Ft (Based on 3/4″ thickness)

This species can be compared to the Natural grade Sipo with the only difference being the way it is cut at the sawmill. Quarter Sawn is achieved by cutting at a right angle to the circumference of the tree producing a flake-like look on the face of the lumber.

This grade is most desirable for a medium to dark stain color.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Walnut (Budget-Value-Grade)
Wood: Walnut
Grade: Value / Budget

Weight: 2.472 Lb/Sq. Ft (Based on 3/4″ thickness)

This “Price Point Product” may contain: narrow staves, sapwood, heartwood, pin knots and all other natural characteristics commonly found within this species. This grade will not be color and grain matched, but will be structurally sound and should prove to be a good value for your dollar. Expect a large range of color throughout the entire order.

This grade is most desirable for medium to dark stain colors, but do expect some color variations from stave to stave due to the makeup of the raw material.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Birch - Rustic Grade
Wood: Birch
Grade: Rustic Grade

Weight: 2.875 Lb/Sq. Ft (Based on 3/4″ thickness)

This unique species will have many variations allowed. Small character marks in the grain of the wood, usually referred to as “fleck”, are common. There will be some knots, but none larger than 1½” in diameter measured at the narrowest point.

Color variations may cover the entire range that is normally seen in the sapwood of White and Yellow Birch. Some heartwood may also be included.

Knot size and percentage of fleck and knots are not allowed to be specified by the customer. All materials will be structurally sound.

In an effort to utilize as many natural characteristics as possible and to improve yield, some knots may have voids and some “Canyon Knots” may be partially filled, but no visible light will show through. Occasional worm holes are allowed.

Knots are a characteristic of Rustic Grade, however, they are difficult to include on moldings less than 1 ½” wide because they substantially weaken the molding. When a molding is less than 1 ½” wide, WalzCraft will try to maintain a Rustic Grade look without the use of knots.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Wood: Jatoba - Brazilian Cherry
Grade: Value / Budget

Weight: 3.163 Lb/Sq. Ft (Based on 3/4″ thickness)

Sometimes referred to as “Brazilian Cherry”, this “Price Point Product” may contain: narrow staves, sapwood, heartwood, pin knots and all other natural characteristics commonly found within this species.

This grade will not be color and grain matched, but will be structurally sound and should prove to be a good value for your dollar. Expect a large range of color throughout the entire order. Do expect some color variations from stave to stave due to the makeup of the raw material.

WalzCraft only recommends a medium to dark stain color with this wood species and never a natural finish.

Wood: Cherry - No Sap (Straight Grain)
Grade: Natural / Standard

Weight: 2.264 Lb/Sq. Ft (Based on 3/4″ thickness)

Natural characteristics common within this species are allowed, but no sap is allowed on the face of the product. Sap which might appear would be in small amounts in profiled areas only.

This grade will be matched using Quarter Sawn lumber that is sorted by WalzCraft to produce a “straight grain” look. A small percentage of pin knots, mineral and gum pockets will be allowed on the face and in the profiled areas with voids allowed in gum pockets.

This grade is most desirable for medium to dark stain colors. To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Wood: Jatoba - Brazilian Cherry
Grade: Mill

Weight: 3.163 Lb/Sq. Ft (Based on 3/4″ thickness)

Sometimes referred to as “Brazilian Cherry”, natural characteristics common within this species are allowed which will result in a blend of pale to reddish brown heartwood and light brown heartwood throughout the product. Sapwood is not allowed in this specie.

WalzCraft only recommends a medium to dark stain color with this wood species and never a natural finish.

Material: MDF - Raw
(5-Piece Raised Panel)
Grade: Paint

Weight: 3.000 Lb/Sq. Ft (Based on 3/4″ thickness)

This grade utilizes all MDF material. WalzCraft recommends MDF for painting and for use with our SolidTone® colors. MDF is very stable and does not incur the same seasonal expansion and contraction issues that can develop at the joints on hardwood doors, such as hairline cracks. The density of this material is approximately 48lbs pre cubic foot (pef).

Walnut-No Sap (Natural-Standard-Grade)
Wood: Walnut- No Sap
Grade: Natural / Standard

Weight: 2.472 Lb/Sq. Ft (Based on 3/4″ thickness)

Natural characteristics common within this species are allowed, but no sap is allowed on the face of the product. Sap which might appear in profiled areas is allowed in small amounts. Natural characteristics like pin knots will be allowed on the face and in profiled areas.

We feel this grade is acceptable for use with a Natural/Clear Coat (no stain) finish, but may be enhanced with a light walnut colored stain.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Maple-Soft - (Natural-Standard Grade)
Wood: Maple - Soft
Grade: Natural / Standard

Weight: 2.417 Lb/Sq. Ft (Based on 3/4″ thickness)

Natural characteristics common within this species are allowed, which results in a mixture of mostly sapwood with some heartwood allowed.

We highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Wood: Cherry - No Sap
Grade: Natural / Standard

Weight: 2.264 Lb/Sq. Ft (Based on 3/4″ thickness)

Natural characteristics common within this species are allowed, such as; a broad range of heartwood coloration, but no sap is allowed on the face of the product. Sap which might appear would be in small amounts in profiled areas only. A small percentage of pin knots, mineral and gum pockets will be allowed on the face and in the profiled areas with voids allowed in gum pockets.

This grade is most desirable for medium to dark stain colors. To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Hickory - (Ultra Rustic Grade)
Wood: Hickory
Grade: Ultra Rustic

Weight: 3.264 Lb/Sq. Ft (Based on 3/4″ thickness)

This grade is everything that our Rustic grade is and more. All materials will be structurally sound. In an effort to utilize as many natural characteristics as possible and to improve yield, some knots may have voids and some “Canyon Knots” may be partially filled, but no visible light will show through. Occasional worm holes are allowed.

Knots are a characteristic of Rustic Grade, however, they are difficult to include on moldings less than 1 ½” wide because they substantially weaken the molding. When a molding is less than 1 ½” wide, WalzCraft will try to maintain a Rustic Grade look without the use of knots.

Hickory and Pecan are so closely related that individual specimens cannot be identified with any certainty.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.