Afrormosia Natural Grade Wood Species
Wood: Afrormosia
Grade: Natural / Standard

Weight: 3.009 Lb/Sq. Ft (Based on 3/4″ thickness)

Natural characteristics common within this species are allowed which will result in a golden brown blend of sapwood and heartwood throughout.

When ordering prefinished from WalzCraft, this grade is only available with a Natural/Clear Coat (no stain) finish.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Alder Natural Grade Wood Species
Wood: Alder
Grade: Natural / Standard

Weight: 1.917 Lb/Sq. Ft (Based on 3/4″ thickness)

Natural characteristics common within this species are allowed which will result in a blend of reddish brown wood throughout the product.

This product is most desirable for a medium to dark stain color.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Alder PS Natural Grade Wood Species
Wood: Alder - PS
Grade: Natural / Standard

Natural characteristics common within this species are allowed which will result in a blend of reddish brown wood throughout the product.

This product is most desirable for a medium to dark stain color.

Veneer center panel is approximately .220″ (5.6mm) thick and has an “A” grade face with a #1 back on MDF core.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Beech-European-Steamed-Natural-Standard-Grade-Wood-Species-WalzCraft
Wood: Beech - European Steamed
Grade: Natural / Standard

Weight: 3.006 Lb/Sq. Ft (Based on 3/4″ thickness)

Natural characteristics common within this species are allowed which may result in a blend of brown to reddish brown heartwood and a light brown sapwood throughout the
product.

This product is most desirable for a medium to dark stain color.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Beech - European Steamed - PS - Natural Grade
Wood: Beech - European Steamed - PS
Grade: Natural / Standard

Natural characteristics common within this species are allowed which may result in a blend of brown to reddish brown heartwood and a light brown sapwood throughout the
product.

This product is most desirable for a medium to dark stain color.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Wood: Birch - RC
Grade: Natural / Standard

Natural characteristics common in this species are allowed, which results in a mixture mostly sapwood with some heartwood allowed. A small percentage of mineral and flecks will be allowed on the face and in profiled areas.

We recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

This grade is most desirable for a medium to dark stain.

Veneer center panel is approximately .220″ (5.6mm) thick and has an “A” grade face with a #1 back on an MDF core.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Wood: Birch - Red
Grade: Natural / Standard

Weight: 2.737 Lb/Sq. Ft (Based on 3/4″ thickness)

This grade is selected from the heartwood of the Birch species. Natural characteristics common within this species are allowed.

This grade is highly recommended when using a Natural/Clear Coat (no stain) to light stain color.

If a stain color is required, we highly recommend a light colored “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Wood: Butternut
Grade: Natural / Standard

Weight: 1.786 Lb/Sq. Ft (Based on 3/4″ thickness)

Natural characteristics common within this species are allowed which may result in a blend of light brown heartwood and light colored sapwood throughout.

This product is most desirable for a medium to dark stain color.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Cherry - Calico Mix - Natural/Standard Grade Wood Species
Wood: Cherry - Calico / Mixed
Grade: Natural / Standard

Weight: 2.264 Lb/Sq. Ft (Based on 3/4″ thickness)

Natural characteristics common within this species are allowed. A small percentage of pin knots, mineral and gum pockets will be allowed on the face and in the profiled areas with voids allowed in gum pockets.

This grade will allow a mixture of sap and heartwood blended throughout, creating a calico look. When matching center panels for this species, WalzCraft pays particular attention to ensuring that Sapwood is mated/matched to Sapwood, and Heartwood is mated/matched to Heartwood to avoid Sapwood to Heartwood transitions at a glue line.

This grade is most desirable for medium to dark stain colors. To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Wood: Cherry
Grade: Natural / Standard

Weight: 2.264 Lb/Sq. Ft (Based on 3/4″ thickness)

Natural characteristics common within this species are allowed, which results in a mixture of mostly heartwood with some sapwood allowed. A small percentage of pin knots, mineral and gum pockets will be allowed on the face and in the profiled areas with voids allowed in gum pockets.

This grade is most desirable for medium to dark stain colors. To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Cherry Wood Species Sample
Wood: Cherry - No Sap
Grade: Natural / Standard

Weight: 2.264 Lb/Sq. Ft (Based on 3/4″ thickness)

Natural characteristics common within this species are allowed, such as; a broad range of heartwood coloration, but no sap is allowed on the face of the product. Sap which might appear would be in small amounts in profiled areas only. A small percentage of pin knots, mineral and gum pockets will be allowed on the face and in the profiled areas with voids allowed in gum pockets.

This grade is most desirable for medium to dark stain colors. To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Wood: Cherry - No Sap - PS
Grade: Natural / Standard

Natural characteristics common within this species are allowed, but no sap is allowed on the face of the product. Sap which might appear would be in small amounts in profiled areas only. A small percentage of pin knots, mineral and gum pockets will be allowed on the face and in the profiled areas with voids allowed in gum pockets.

This grade is most desirable for medium to dark stain colors. To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Veneer center panel is .220″ (5.6mm) thick and has an “A” grade face with a #1 back on an MDF core. This species is prone to darken as it ages.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Wood: Cherry - No Sap (Straight Grain)
Grade: Natural / Standard

Natural characteristics common within this species are allowed, but no sap is allowed on the face of the product. Sap which might appear would be in small amounts in profiled areas only.

This grade will be matched using Quarter Sawn lumber that is sorted by WalzCraft to produce a “straight grain” look. A small percentage of pin knots, mineral and gum pockets will be allowed on the face and in the profiled areas with voids allowed in gum pockets.

This grade is most desirable for medium to dark stain colors. To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Wood: Cherry - No Sap (Straight Grain)
Grade: Natural / Standard

Weight: 2.264 Lb/Sq. Ft (Based on 3/4″ thickness)

Natural characteristics common within this species are allowed, but no sap is allowed on the face of the product. Sap which might appear would be in small amounts in profiled areas only.

This grade will be matched using Quarter Sawn lumber that is sorted by WalzCraft to produce a “straight grain” look. A small percentage of pin knots, mineral and gum pockets will be allowed on the face and in the profiled areas with voids allowed in gum pockets.

This grade is most desirable for medium to dark stain colors. To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Wood: Cherry - PS
Grade: Natural / Standard

Natural characteristics common within this species are allowed, which results in a mixture of mostly heartwood with some sapwood allowed. A small percentage of pin knots, mineral and gum pockets will be allowed on the face and in the profiled areas with voids allowed in gum pockets.

This grade is most desirable for medium to dark stain colors. To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Veneer center panel is .220″ (5.6mm) thick and has an “A” grade face with a #1 back on an MDF core.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Wood: Cherry - RC
Grade: Natural / Standard

Natural characteristics common within this species are allowed, which results in a mixture of mostly heartwood with some sapwood allowed. A small percentage of pin knots, mineral and gum pockets will be allowed on the face and in the profiled areas with voids allowed in gum pockets.

This grade is most desirable for medium to dark stain colors. To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Veneer center panel is .220″ (5.6mm) thick and has an “A” grade face with a #1 back on an MDF core.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.