Maple – Hard / Soft Mix – RC – Value / Budget / Paint Grade

Wood Species / Grade Description

Constructed of Hard Maple and Soft Maple, this “Price Point Product” may contain: sapwood, heartwood, pin knots and all other natural characteristics commonly found within this species.

This grade will not be color and grain matched, but will be structurally sound and should prove to be a good value for your dollar. Expect a large range of color throughout the entire order.

This grade is specifically intended for a painted finish.

WalzCraft prepares its Value/Budget/Paint Grade wood species with the intent that it be suitable for painting or staining. A minimal amount of checking is allowed. Occasionally, when painting, this checking does not expose itself until after the primer coat has been applied.

When ordered unfinished, if necessary, these small checks can easily be filled and sanded by the customer prior to applying the final coats of paint.

When staining, this grade is most suitable for dark colors.

Veneer center panel is approximately .220″ (5.6mm) thick and has an “A” grade face with a #1 back on an MDF core.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.