Mahogany Sapele Select Grade
Wood: Mahogany - Sapele - PS
Grade: Select / Premium

Door Dimensions of Wood Species Pictured: 12” W x 18” H

Natural characteristics common within this species will be monitored under closer quality guidelines than with the natural grade. This grade will have a uniform color and grain match.

This grade is highly recommended when using a natural to light stain color.

The veneer center panel is approximately .220″ (5.6mm) thick and has an “A” grade face with a #1 back on an MDF core.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.


Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Mahogany Sapele Natural Wood
Wood: Mahogany - Sapele - PS
Grade: Natural / Standard

Door Dimensions of Wood Species Pictured: 12” W x 18” H

Natural characteristics common within this species are allowed which will result in a reddish-brown blend of sapwood and heartwood throughout.

This grade is most desirable for a medium to dark stain color.

Veneer center panel is approximately .220″ (5.6mm) thick and has an “A” grade face with a #1 back on an MDF core.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.


Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Mahogany Sapele Select Grade
Wood: Mahogany - Sapele
Grade: Select / Premium

Weight: 2.453 Lb/Sq. Ft (Based on 3/4″ thickness)

Door Dimensions of Wood Species Pictured: 12” W x 18” H

Natural characteristics common within this species will be monitored under closer quality guidelines than with Natural/Standard grades.

This grade will be uniform in color throughout and will be grain-matched, resulting in a more consistent grain pattern and a lighter color.

This grade is recommended when using a Natural/Clear Coat (no stain) to light stain color.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Mahogany Sapele Wood Species
Wood: Mahogany - Sapele
Grade: Natural / Standard

Weight: 2.453 Lb/Sq. Ft (Based on 3/4″ thickness)

Door Dimensions of Wood Species Pictured: 12” W x 18” H

Natural characteristics common within this species are allowed which may result in a reddish-brown blend of sapwood and heartwood.

This grade is most desirable for a medium to dark stain color.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Straight Grain Maple Veneer Wood Species
Wood: Maple - Hard - Straight Grain
Grade: Natural / Standard Veneer

Door Dimensions of Wood Species Pictured: 12” W x 18” H

This is an all sapwood veneer, but expect a small amount of occasional heartwood. It is very light yellow to white in color and may have slight mineral streaks and color variation.

Straight grain veneer is made from quarter sliced veneer to maintain a true straight grain look. Expect about 4 to 6 face splices per 4 x 8 Sheet.

This product is intended for a more contemporary look. If consistency in grain or color is important for individual doors and/or drawer fronts that will be installed directly above or below one another, we highly recommend utilizing WalzCraft’s Continuous Grain Option.

To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Rotary Cut Maple Veneer Wood Species
Wood: Maple - Hard - RC
Grade: Select / Premium Veneer

Door Dimensions of Wood Species Pictured: 12” W x 18” H

This is an all sapwood veneer with very few defects of any sort. It is very light yellow to white in color and usually has 4 to 6 face splices per 4 x 8 Sheet.

This product is intended for a more contemporary look. If consistency in grain or color is important for individual doors and/or drawer fronts that will be installed directly above or below one another, we highly recommend utilizing WalzCraft’s Continuous Grain Option.

To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Rotary Cut Hard Maple Veneer
Wood: Maple - Hard - RC
Grade: Natural / Standard Veneer

Door Dimensions of Wood Species Pictured: 12” W x 18” H

This is an all sapwood veneer, but expect a small amount of occasional heartwood. It is very light yellow to white in color and may have slight mineral streaks and color variation. Expect about 4 to 6 face splices per 4 x 8 Sheet.

This product is intended for a more contemporary look. If consistency in grain or color is important for individual doors and/or drawer fronts that will be installed directly above or below one another, we highly recommend utilizing WalzCraft’s Continuous Grain Option.

To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Hard Maple Veneer Wood Species
Wood: Maple - Hard - PS
Grade: Select / Premium Veneer

Door Dimensions of Wood Species Pictured: 12” W x 18” H

This is an all sapwood veneer with very few defects of any sort. It is very light yellow to white in color and usually has 4 to 6 face splices per 4 x 8 Sheet.

This product is intended for a more contemporary look. If consistency in grain or color is important for individual doors and/or drawer fronts that will be installed directly above or below one another, we highly recommend utilizing WalzCraft’s Continuous Grain Option.

To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Plain Sliced Hard Maple Veneer Wood Species
Wood: Maple - Hard - PS
Grade: Natural / Standard Veneer

Door Dimensions of Wood Species Pictured: 12” W x 18” H

This is an all sapwood veneer, but expect a small amount of occasional heartwood. It is very light yellow to white in color and may have slight mineral streaks and color variation. Expect about 4 to 6 face splices per 4 x 8 Sheet.

This product is intended for a more contemporary look. If consistency in grain or color is important for individual doors and/or drawer fronts that will be installed directly above or below one another, we highly recommend utilizing WalzCraft’s Continuous Grain Option.

To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Curly Maple Veneer Wood Species
Wood: Maple - Hard - Curly - PS
Grade: Select / Premium Veneer

Door Dimensions of Wood Species Pictured: 12” W x 18” H

This is an all sapwood veneer with better color consistency than the Natural/Standard Grade. It is very light yellow to white in color with numerous areas of curly grain. This veneer usually has 4 to 6 face splices per 4 x 8 Sheet.

This product is intended for a more contemporary look. If consistency in grain or color is important for individual doors and/or drawer fronts that will be installed directly above or below one another, we highly recommend utilizing WalzCraft’s Continuous Grain Option.

We recommend a Natural/Clear Coat (no stain) whenever using this species so that the curly character does not get masked over by the stain color. If a stain color is required, we highly recommend a light-colored “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Plain Sliced Curly Maple Veneer Wood Species
Wood: Maple - Hard - Curly - PS
Grade: Natural / Standard Veneer

Door Dimensions of Wood Species Pictured: 12” W x 18” H

This is an all sapwood veneer, but expect a small amount of occasional heartwood. It is very light yellow to white in color and may have slight color variation along with numerous areas of Curly Grain. Expect about 4 to 6 face splices per 4 x 8 Sheet.

This product is intended for a more contemporary look. If consistency in grain or color is important for individual doors and/or drawer fronts that will be installed directly above or below one another, we highly recommend utilizing WalzCraft’s Continuous Grain Option.

We recommend a Natural/Clear Coat (no stain) whenever using this species so that the curly character does not get masked over by the stain color. If a stain color is required, we highly recommend a light-colored “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Calico Mixed Hard Maple Veneer Wood Species
Wood: Maple - Hard - Calico / Mixed
Grade: Select / Premium Veneer

Door Dimensions of Wood Species Pictured: 12” W x 18” H

This veneer consists of a mixture of heartwood and sapwood often referred to as “Calico”. It includes a mix of light tan and light brown tones with very few defects of any sort. Expect about 4 to 6 face splices per 4 x 8 Sheet.

This product is intended for a more contemporary look. If consistency in grain or color is important for individual doors and/or drawer fronts that will be installed directly above or below one another, we highly recommend utilizing WalzCraft’s Continuous Grain Option.

We recommend a Natural/Clear Coat (no stain) whenever using this species. If a stain color is required, we highly recommend a light-colored “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Birds Eye Maple Veneer Wood Species
Wood: Maple - Hard - Birds Eye - PS
Grade: Select / Premium Veneer

Door Dimensions of Wood Species Pictured: 12” W x 18” H

This is an all sapwood veneer with better color consistency than the Natural/Standard Grade. It is very light yellow to white in color with numerous Birds Eye character marks. This veneer usually has 4 to 6 face splices per 4 x 8 Sheet.

This product is intended for a more contemporary look. If consistency in grain or color is important for individual doors and/or drawer fronts that will be installed directly above or below one another, we highly recommend utilizing WalzCraft’s Continuous Grain Option.

We recommend a Natural/Clear Coat (no stain) whenever using this species so that the Birds Eye does not get masked over by the stain color. If a stain color is required, we highly recommend a light-colored “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

MDF - Raw - MEDEX
Material: MDF - Raw - MEDEX (NAUF)
(1-Piece Raised Panel)
Grade: Paint

Weight: 3.000 Lb/Sq. Ft (Based on 3/4″ thickness)

Door Dimensions of Wood Species Pictured: 12” W x 18” H

This grade utilizes only MEDEX “Moisture Resistant” MDF (Medium Density Fiberboard) material. WalzCraft recommends MDF for painting and for use with our SolidTone ® colors.

MDF is very stable and does not incur the same seasonal expansion and contraction issues that can develop at the joints on hardwood doors, such as hairline cracks. MEDEX has no added urea-formaldehyde (NAUF). Density is approximately 48 lbs per cubic foot (PCF).

WalzCraft Products made using MEDEX are suitable for use in interior high moisture areas only.

Cherry - Calico Mix - Natural/Standard Grade Wood Species
Wood: Cherry - Calico / Mixed
Grade: Natural / Standard

Weight: 2.264 Lb/Sq. Ft (Based on 3/4″ thickness)

Door Dimensions of Wood Species Pictured: 12” W x 18” H

Natural characteristics common within this species are allowed. A small percentage of pin knots, mineral, and gum pockets will be allowed on the face and in the profiled areas with voids allowed in gum pockets.

This grade will allow a mixture of sap and heartwood to blend throughout, creating a calico look. When matching center panels for this species, WalzCraft pays particular attention to ensuring that Sapwood is mated/matched to Sapwood, and Heartwood is mated/matched to Heartwood to avoid Sapwood to Heartwood transitions at a glue line.

This grade is most desirable for medium to dark stain colors. To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

oak-red-quarter-sawn-heavy-ray-flake-natural-standard-grade
Wood: Oak - Red - Quarter Sawn (Heavy Ray/Flake)
Grade: Natural / Standard

Weight: 2.579 Lb/Sq. Ft (Based on 3/4″ thickness)

Door Dimensions of Wood Species Pictured: 12” W x 18” H

This species can be compared to the Natural grade Red Oak with the only difference being the way it is cut at the sawmill. Quarter Sawn is achieved by cutting at right angles to the circumference of the tree producing a heavy ray/flake-like look on the face of the lumber.

When manufacturing Oak Quarter Sawn products in solid wood or veneer, WalzCraft strives to include an even distribution of a heavy ray/flake-like look throughout the face of the product only.

This grade is carefully matched to assure that 100% of the panel staves and 100% of the Stile and Rail parts have easily apparent Quarter Sawn rays/flakes.

Highly recommended when using a Natural/Clear Coat (no stain) to light stain color.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.