Non-Adhesive Phenolic Back 3D Laminate (RTF)

Our 3D Laminate RTF Veneer with a Phenolic Back is stiffer, thicker and more resistant to dents then other RTF Veneer Skins. These results in 3D Laminate Veneer that lies flat and will not wrinkle or dimple when applied to a surface. For that reason, Cabinet Refacers commonly use this veneer on the cabinet end panels of RTF Thermofoil cabinet refacing projects.

Many phenolic back materials will leave a black line at the edge or corner of a cabinet. However, our Non-Adhesive Phenolic Back Veneers use a lighter colored phenolic that eliminates this issue. This type of veneer is also known as a “No Black Line” veneer.

The phenolic backing is similar to laminate countertop material and has characteristics that cause it to perform like laminate. Solvent-based or water based contact cement can be used for this product application. The phenolic backing acts as a barrier between the glue and the 3D Laminate Thermofoil. This eliminates any chance of the finish being affected by any solvent based adhesives bleeding through the veneer during the installation process.

WalzCraft does offer a Veneer Smoothing Tool made of a beveled plexiglass blade that will not scratch veneer products during installation.

Contact Customer Support to learn more about this product.

Non-Adhesive Phenolic Back Veneer Specifications

as Shown

  • 89

Additional Information

Thicknesses: Phenolic material adds approximately .020″ to the thickness of the 3D Laminate (RTF) Loose Foil. 3D Laminate Loose Foil (RTF) thickness varies between .012″ – .022″ thick depending on the 3D Laminate (RTF).

Rough Cut to Stock Sizes (RCSS): 4′ x 8′, 2′ x 8′, 4′ x 4′, and 2′ x 4′

Ripped to Rough Width (RTRW) Sheet Sizes: Customer specified – Width x 8′ lengths

Precision Cut to Size (PCTS) Sheet Sizes: Customer specified – Width x Length (up to 4′ x 8′)

3D Laminate (RTF) Color Options

All of WalzCraft’s 3D Laminate / RTF Colors are available in Non-Adhesive Phenolic back Veneer Sheets. View Color Options.

Custom Pressed

Non-Adhesive Phenolic Back 3D Laminate (RTF) is also available custom pressed on 1/4″ thick through 1″ thick MDF sheet stock.

3D Laminate (RTF) Sheet Stock & Refacing Materials

VIEW CATALOG OPTIONS & SPECIFICATIONS

WalzCraft Online Catalog

LEARN MORE ABOUT REFACING MATERIALS

WalzCraft Cabinet Refacing Materials