Birch - Paint Grade - MDF Panel
Wood: Birch - Hybrid / MDF
Grade: Paint

Door Dimensions of Wood Species Pictured: 12” W x 18” H

WalzCraft offers this “Hybrid” Species to allow customers the flexibility of choosing Birch solid wood “Paint Grade” Stiles & Rails, and pairing them with an MDF Center Panel.

This “Hybrid” combination is recommended with the specific intent that it be painted.

Because there is minimal expansion or contraction in the MDF center panel, the likelihood of hairline cracks is minimized.

The MDF center panel is approximately .220″ (5.6mm) thick.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Birch Paint Grade MDF
Wood: Birch - Hybrid / MDF
Grade: Paint

Door Dimensions of Wood Species Pictured: 12” W x 18” H

WalzCraft offers this “Hybrid” Species to allow customers the flexibility of choosing Birch solid wood “Paint Grade” Stiles & Rails, and pairing them with an MDF Center Panel.

This “Hybrid” combination is recommended with the specific intent that it be painted.

Because there is minimal expansion or contraction in the MDF center panel, the likelihood of hairline cracks is minimized.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Birch Paint Grade RC
Wood: Birch - RC
Grade: Paint

Door Dimensions of Wood Species Pictured: 12” W x 18” H

WalzCraft prepares its Value/Budget/Paint Grade wood species with the intent that it be suitable for staining or painting. A minimal amount of checking is allowed. Occasionally, when painting, this checking does not expose itself until after the primer coat has been applied. When ordered unfinished, if necessary, these small checks can easily be filled and sanded by the customer prior to applying the final coats of paint.

This “Price Point Product” may contain: sapwood, heartwood, pin knots and all other natural characteristics commonly found within this species. This grade will not be color and grain matched, but will be structurally sound and should prove to be a good value for your dollar. Expect a large range of colors throughout the entire order.

If staining, this grade is most desirable for a dark stain color.

The veneer center panel is approximately .220″ (5.6mm) thick and has an “A” grade face with a #1 back on an MDF core.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Birch Paint Grade
Wood: Birch
Grade: Value / Budget / Paint

Weight: 2.875 Lb/Sq. Ft (Based on 3/4″ thickness)

Door Dimensions of Wood Species Pictured: 12” W x 18” H

WalzCraft manufactures its Value/Budget/Paint Grade wood species with the intent that it be suitable for staining or painting. A minimal amount of checking is allowed. Occasionally, when painting, this checking does not expose itself until after the primer coat has been applied.

When ordered unfinished, if necessary, these small checks can easily be filled and sanded by the customer prior to applying the final coats of paint.

This “Price Point Product” may contain narrow staves, sapwood, heartwood, pin knots, and all other natural characteristics commonly found within this species.

This grade will not be color and grain matched, but will be structurally sound and should prove to be a good value for your dollar. Expect a large range of colors throughout the entire order.

This grade is an excellent choice for doors for apartment complex projects or other multi-family housing units where economy and value are important.

If staining, this grade is most desirable for medium to dark stain colors. To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a “Wiping” Stain process when using this species.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Cherry Wood Doors with MDF Center Panel
Wood: Cherry - Hybrid / MDF
Grade: Paint

Door Dimensions of Wood Species Pictured: 12” W x 18” H

WalzCraft offers this “Hybrid” Species to allow customers the flexibility of choosing Cherry solid wood “Paint Grade” Stiles & Rails, and pairing them with an MDF Center Panel.

This “Hybrid” combination is recommended with the specific intent that it be painted. Because there is minimal expansion or contraction in the MDF center panel, the likelihood of hairline cracks is minimized.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Cherry Wood Doors with MDF Center Panel
Wood: Cherry - Hybrid / MDF
Grade: Paint

Door Dimensions of Wood Species Pictured: 12” W x 18” H

WalzCraft offers this “Hybrid” Species to allow customers the flexibility of choosing Cherry solid wood “Paint Grade” Stiles & Rails, and pairing them with an MDF Center Panel.

This “Hybrid” combination is recommended with the specific intent that it be painted. Because there is minimal expansion or contraction in the MDF center panel, the likelihood of hairline cracks is minimized.

Special Note About Photosensitive Darkening

Due to the natural photosensitive darkening process that occurs with Cherry, Lyptus, Mahogany and Sapele, we advise that you finish these products immediately upon receiving.

If a color variation transpires, simply exposing the product to direct natural sunlight will help to result in a more even shading. Traces of shadowing (darkening) may be visible, and considered acceptable, on the back sides of product.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion.

Please contact our Customer Support Team to place your order.

Wood: Maple - Hard / Soft Mix - Hybrid / MDF
Grade: Paint

Door Dimensions of Wood Species Pictured: 12” W x 18” H

WalzCraft offers this “Hybrid” Species to allow customers the flexibility of choosing Maple-Mixed Species solid wood “Paint Grade” Stiles & Rails, and pairing them with an MDF Center Panel.

This “Hybrid” combination is recommended with the specific intent that it be painted.

Because there is minimal expansion or contraction in the MDF center panel, the likelihood of hairline cracks is minimized.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Paint Grade Maple Door Sample
Wood: Maple - Hard / Soft Mix - Hybrid / MDF
Grade: Paint

Door Dimensions of Wood Species Pictured: 12” W x 18” H

WalzCraft offers this “Hybrid” Species to allow customers the flexibility of choosing Maple-Mixed Species solid wood “Paint Grade” Stiles & Rails, and pairing them with an MDF Center Panel.

This “Hybrid” combination is recommended with the specific intent that it be painted.

Because there is minimal expansion or contraction in the MDF center panel, the likelihood of hairline cracks is minimized.

The MDF center panel is approximately .220″ (5.6mm) thick.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Budget Maple Wood Species Sample
Wood: Maple - Hard / Soft Mix - RC
Grade: Paint

Door Dimensions of Wood Species Pictured: 12” W x 18” H

Constructed of Hard Maple and Soft Maple, this “Price Point Product” may contain: sapwood, heartwood, pin knots and all other natural characteristics commonly found within this species.

This grade will not be color and grain matched, but will be structurally sound and should prove to be a good value for your dollar. Expect a large range of color throughout the entire order.

This grade is specifically intended for a painted finish.

WalzCraft prepares its Value/Budget/Paint Grade wood species with the intent that it be suitable for painting or staining. A minimal amount of checking is allowed. Occasionally, when painting, this checking does not expose itself until after the primer coat has been applied.

When ordered unfinished, if necessary, these small checks can easily be filled and sanded by the customer prior to applying the final coats of paint.

When staining, this grade is most suitable for dark colors.

The veneer center panel is approximately .220″ (5.6mm) thick and has an “A” grade face with a #1 back on an MDF core.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Maple-Hard-Soft-Mix - (Value-Budget-Paint Grade)
Wood: Maple - Hard / Soft Mix
Grade: Value / Budget / Paint

Weight: 2.584 Lb/Sq. Ft (Based on 3/4″ thickness)

Door Dimensions of Wood Species Pictured: 12” W x 18” H

WalzCraft manufactures its Value/Budget/Paint Grade wood species with the intent that it be suitable for staining or painting. A minimal amount of checking is allowed. Occasionally, when painting, this checking does not expose itself until after the primer coat has been applied.

When ordered unfinished, if necessary, these small checks can easily be filled and sanded by the customer prior to applying the final coats of paint.

Constructed of Hard Maple and Soft Maple this “Price Point Product” may contain: narrow staves, sapwood, heartwood, pin knots, and all other natural characteristics commonly found in both species.

This grade will not be color and grain matched, but will be structurally sound and should prove to be a good value for your dollar. Expect a large range of colors throughout the entire order.

This grade is an excellent choice for doors for apartment complex projects or other multi-family housing units where economy and value are important.

Due to darker heartwood being present within this grade, some surface cracking may exist.

If staining, this grade is most desirable for a medium to dark stain color.  To reduce the likelihood of a blotchy finish, we highly recommend a “Spray No Wipe” stain process, not a Wiping stain process when using this species.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

MDF - Raw - MEDEX
Material: MDF - Raw - MEDEX (NAUF)
(1-Piece Raised Panel)
Grade: Paint

Weight: 3.000 Lb/Sq. Ft (Based on 3/4″ thickness)

Door Dimensions of Wood Species Pictured: 12” W x 18” H

This grade utilizes only MEDEX “Moisture Resistant” MDF (Medium Density Fiberboard) material. WalzCraft recommends MDF for painting and for use with our SolidTone ® colors.

MDF is very stable and does not incur the same seasonal expansion and contraction issues that can develop at the joints on hardwood doors, such as hairline cracks. MEDEX has no added urea-formaldehyde (NAUF). Density is approximately 48 lbs per cubic foot (PCF).

WalzCraft Products made using MEDEX are suitable for use in interior high moisture areas only.

Raw MDF 5-Piece Flat Panel Cabinet Door
Material: MDF - Raw
(5-Piece Flat Panel)
Grade: Paint

Weight: 3.000 Lb/Sq. Ft (Based on 3/4″ thickness)

Door Dimensions of Wood Species Pictured: 12” W x 15” H

This grade utilizes all MDF material. WalzCraft recommends MDF for painting and for use with our SolidTone® colors. MDF is very stable and does not incur the same seasonal expansion and contraction issues that can develop at the joints on hardwood doors, such as hairline cracks. The density of this material is approximately 48lbs per cubic foot (PCF).

Raw MDF 5-Piece Raised Panel Cabinet Door
Material: MDF - Raw
(5-Piece Raised Panel)
Grade: Paint

Weight: 3.000 Lb/Sq. Ft (Based on 3/4″ thickness)

Door Dimensions of Wood Species Pictured: 12” W x 15” H

This grade utilizes all MDF material. WalzCraft recommends MDF for painting and for use with our SolidTone® colors. MDF is very stable and does not incur the same seasonal expansion and contraction issues that can develop at the joints on hardwood doors, such as hairline cracks. The density of this material is approximately 48lbs per cubic foot (PCF).

Wood: Poplar
Grade: Value / Budget / Paint

Weight: 2.168 Lb/Sq. Ft (Based on 3/4″ thickness)

Door Dimensions of Wood Species Pictured: 12” W x 18” H

WalzCraft manufactures its Value/Budget/Paint Grade wood species with the intent that it be suitable for staining or painting. A minimal amount of checking is allowed. Occasionally, when painting, this checking does not expose itself until after the primer coat has been applied.

When ordered unfinished, if necessary, these small checks can easily be filled and sanded by the customer prior to applying the final coats of paint.

This “Price Point Product” may contain narrow staves, sapwood, heartwood, pin knots, and all other natural characteristics commonly found within this species.

This grade will not be color and grain matched, but will be structurally sound and should prove to be a good value for your dollar. Expect a large range of colors throughout the entire order.

This grade is an excellent choice for doors for apartment complex projects or other multi-family housing units where economy and value are important.

If staining, this grade is most desirable for medium to dark stain colors.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Wood: Poplar - Hybrid / MDF
Grade: Paint

Door Dimensions of Wood Species Pictured: 12” W x 18” H

WalzCraft offers this “Hybrid” Species to allow customers the flexibility of choosing Poplar solid wood “Paint Grade” Stiles & Rails, and pairing them with an MDF Center Panel.

This “Hybrid” combination is recommended with the specific intent that it be painted.

Because there is minimal expansion or contraction in the MDF center panel, the likelihood of hairline cracks is less.

The veneer center panel is approximately .220″ (5.6mm) thick.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.

Wood: Poplar - Hybrid / MDF
Grade: Paint

Weight: 2.168 Lb/Sq. Ft (Based on 3/4″ thickness)

Door Dimensions of Wood Species Pictured: 12” W x 18” H

WalzCraft offers this “Hybrid” Species to allow customers the flexibility of choosing Poplar solid wood “Paint Grade” Stiles & Rails, and pairing them with an MDF Center Panel.

This “Hybrid” combination is recommended with the specific intent that it be painted.

Because there is minimal expansion or contraction in the MDF center panel, the likelihood of hairline cracks is less.

Note: All Wood Species Samples are shown with a Natural / Clear Coat (No Stain) Finish and will look different when ordered unfinished.

Disclaimer for Color

Actual product color and detail may vary due to individual computer preferences and monitor settings. We highly recommend ordering an actual product sample of the species and stain color to eliminate any confusion. Please contact our Customer Support Team to place your order.